1.1mL Screw Top Tapered Vial – Clear, GOLD-Grade. 1.1-STVG. 9mm Wide Opening, Screw-Thread Vials and Insert. 2mL Wide Mouth Screw SureStop GOLD-Grade Vial with Write-on Patch - Clear. 2-SVWGK. 0.2mL Screw Top Fixed Insert Vial – GOLD-Grade with Write-on Patch ( Micro+) 02-FISVG. 200µL Insert, GOLD-Grade Glass. 02-MTVWG.
Google Scholar provides a simple way to broadly search for scholarly literature. Search across a wide variety of disciplines and sources: articles, theses, books, abstracts and court opinions.
Diameter : 22.1 mm. ISO injectable vials. Ref. 00850. Add to selection Remove from selection. Capacity : 8 ml. Neck finish : ISO 20. Glass type : Clear glass Type I, Clear glass type II, Clear glass type III, Amber glass type I. Application : Injectable vials in molded glass. Weight : 16 g.
Also called Acid Caps, these polypropylene caps are acid resistant. This F422 liner is comprised of a .38” LDPE core sandwiched between identical layers of .002” - .003” virgin HDPE. Unlined polypropylene closures are available in white or black. These caps are autoclavable and are suitable for many dry products.
Transfer the glass fiber filter plug and section A to a clean 20-mL vial. If the analysis is to be done only for HCl, the glass fiber filter plug can be discarded. If sulfuric and/or phosphoric acids are requested, the glass fiber filter plug must be analyzed separately. 7.5.3 Place silica gel section B in a separate clean 20-mL vial.
Product Details. Glass vials produced by SCHOTT using SCHOTT Fiolax ® neutral Type I glass tubing. Standard 13mm and 20mm crimp neck finishes. 100% camera inspection of dimensional parameters. Camera inspection for critical cosmetic defects. Manufactured and packed according to ISO 9001 and ISO 15378. Vials compliant with EP, JP and USP.
Sterile Empty Vial, Clear. ALK Sterile Empty Vials (SEV) feature Type 1 glass USP borosilicate, and a latex free stopper. ALK SEVs are produced at a cGMP FDA Manufacturer and USP tested for sterility and endotoxins. Certificate of Analysis available for all production lots and vials are aseptically assembled in an.
a. Wash glass vials, Teflon-backed septa. Teflon liners, and caps in hot water using laboratory grade nonphosphate detergent. b. Rinse three times with copious amounts of tap water to remove detergent. c. Rinse three times with ASTM Type I organic-free water. d. Oven dry vials, caps, septa, and liners at 105-125°C for one hour. e.
SCHOTT Vials DC (Delamination Controlled) Glass delamination resulting in barely visible glass flakes has led to recalls of numerous injectable drug products over the past few years. In order to prioritize patient safety, the FDA has reacted to this phenomenon by emphazising the importance of container/drug compatibility testing
4.8 Glass 4,0 mm I.D. liner with glass wool3 4.9 16 mm 100 mm culture tubes 4.10 Amber glass extraction vial (approximately 40 ml) 4.11 Orbital shaker or wrist action shaker 4.12 SPE automated workstation or manual SPE manifold 4.13 Solvent evaporation system 5. REAGENTS Use only reagents of recognized analytical grade.
6.16 n-Hexane HPLC grade or higher 6.17 Glass fiber filter (Cambridge Filter Pad, CFP) 44 mm or 92 mm diameter depending on requirements for smoking machine type 6.18 Autosampler amber glass vials – 2 ml with Teflon lined septa 6.19 Filter paper, qualitative (15 cm diameter, 80 g/m2)
Diagnostic Vials for lyophilisation and IVD kits. Used in conjunction with our lyophilisation stoppers and choice of caps, WHEATON diagnostic vials are an idea solution for your IVD kits. WHEATON ® diagnostic vials are manufactured Type 1B neutral amber and clear tubular glass. Available in sizes 3ml to 25ml.
4. 13 mm x 5 µm PTFE filters and stainless steel filter holder to protect the LC column. 5. Vials, 20-mL, glass, PTFE-lined screw caps. 6. Syringe, 1-mL, with Luer-Lok fitting. 7. Pipets, 10-mL, with pipet bulb. 8. Tweezers. 9. Volumetric flasks, 10-mL. SPECIAL PRECAUTIONS: Acetonitrile is toxic and flammable; work with it only in a hood.
Aug 29, 2008 · 1000 mg C/L (1000 ppm C) stock solution: dissolve 3.50 g of sodium hydrogen carbonate and 4.41 g of sodium carbonate in zero water in a 1 L volumetric flask. 100 mg C/L (100 ppm C) intermediate stock solution: dilute 10 mL of the 1000 ppm standard stock solution in zero water in a 100 mL volumetric flask. Hardware. Shimadzu TOC-5000A instrument
B-D366450Z. Vacutainer Blood Collection Tube with K3 EDTA, Glass, Sterile, Lavender Closure, 13 x 100 mm, 7 mL, 6 mg. 100/BX. Stock Allocated QTY : / Remaining QTY : / Allocation Reset Date : B-D366643. Vacutainer Blood Collection Tube with K2 EDTA, Plastic, Lavender Hemogard Closure, See-Thru Label, 16 x 100 mm, 10 mL, 18 mg. 1000/CS.
