The Vista Vial (tm) is easier to fill - the wide opening of the glass bottom facilitates direct pipetting and is ideal for viscous fluids such as detergents and oils. Depending on the sample, disposal of vials is easier as the plastic can be incinerated intact without the need for closure removal. Compare this item.
Autosampler Vials. 1.5 mL Target Snap-It High Recovery Vials Target 2mL Crimp Top Vials; Waters 1mL SepCap Vials for WISP Autosamplers ... Sample Vials Without ...
The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system.
One hundred packs of 2ml HPLC Sampler Vial with Micro-Insert were ordered in January, and they have been packaged and ready for shipment. Aijiren is a supplier specializing in the production of 1.5ml autosampler vials. The 1.5ml autosampler vials are used in the autosampler of chromatographic analysis experiments.
Specifically designed for the bottom draw-port needle of the Waters ACQUITY UPLC and Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with minimum residual volume. The 9 mm cap makes it ideal for use with Aijiren HPLC and GC Systems. Choosing the level of certified vial should be based on the concentration of analyte.
Vial racks and containers allow a secure transportation of sample vials from lab to lab Safe standing position of the vials on the lab bench in dividers/cavities designed for the respective diameter Racks and containers available for a broad variety for different vial diameters, almost all
1.5ml Crimp Top Glass Vials for THERMO FISHER. 2ml crimp autosampler vial is depending on the filling volume. We differentiate between standard 2ml crimp autosampler vials and micro-vials which either have an interior or exterior volume reducing shape. Alternatively you can of course also use inserts to reduce the volume inside a vial, in order
Sample Vials. Product and ordering information for Sample vials. Made of polypropylene. With LDPE snap-on caps or polypropylene screw-on caps. Volumes from 5 mL to 180 mL. Product already in the list. Sample vials made of polypropylene. Available with snap-on caps (LDPE) or screw-on caps (PP). WARNING – These products can expose you to
Dec 31, 2019 · 1.5 ml screw topped glass autosampler vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. It should allow the vials to warm gradually.
Part Number: 186002649. Waters offers a selection of cap, septum, and assembled cap/septum for various vial sizes. The range of septum material is limited to PTFE, silicone / PTFE, and polyethylene septumless caps. Black, 12 x 32mm Snap Neck Cap and PTFE/silicone Septum, 100/pkg.
Water Analysis Service . Contact; Plastic vial Vial . Vial type Crimp neck vial ... 1.5 mL 2.0 mL 4.0 mL 5.0 mL 6.0 mL 8.0 mL
Borosilicate glass 1.5 mL volume 12 x 32 mm Micro-V vials are compatible with standard screw closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume. Vials are designed for center needle position during sample injection (not recommended for Vortex). Constructed of
Waters holder, 48-well, 2-mL vial 405003743 for standard 2-mL vials Waters holder, 24-well, 4-mL vial 405003742 for large vials Waters holder, 24-well, 1.5-mL tube 405003740 for test tubes Waters holder, 48-well, 0.65-mL tube 405003741 for centrifuge tubes Label, 48-well, 2-ml vial, open access 615003783 Identifies vial position in MassLynxTM
EXCELLENT - Model 1.5ml - 1.5ml HPLC chromatography vial 1.5ml chromatography vial ; 2ml lab vials for HPLC autosampler VIALSIncluding:100pcs Clear/amber bottles 32x11.6mm made of borosilicate glass, 2ml lab vials 9-425 screw thread, Flat base Sample Vials; Made out of USP TYPE I Glass.With writing patch for pencil mark.
settings of the Waters Alliance 2690/2695 HPLC. This vial delivers maximum sample capacity (~1 mL) with minimum residual volume (~9 μL). Waters Maximum Recovery Vial Specifically designed for the bottom draw-port needle of the Waters ACQUITY UPLC and Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with
.jpg)
