Clear glass vials and caps with pre-inserted PTFE/silicone septa for ease of sample preparation. Vial size is 12x32 mm, with a writing patch on the side. 1.5mL short thread vial, 1st hydrolytic class, wide opening, label and filling lines with red cap and pre-inserted silicone/PTFE, 45° shore A, 1.0mm septum. Replacement for 228-45450-91.
0.7ml Crimp Neck Vial IS-1, 40 x 7mm, amber glass, 1st hydrolytic class with inertised surface (IS-1) Content 100 Stück. From €23.84 *. FBHR-20S001. 20ml SPME-Vial silanized (IS-1), flat bottom, 20ml SPME-Vial IS-1, rounded bottom, 75.5 x 22.5mm, amber glass, 1st hydrolytic class with inertised surface (IS-1) Content 100 Stück.
per vial 1.5 mL. Vials can also be used with 2662 Cryo-Block or 2190 Vial Rack. Case of 10 sets, each set containing 24 vials pre-loaded with steel balls. 2241-PC Polycarbonate Vial: 5 mL polycarbonate vial with screw-on polyethylene cap. 1/2 in. diameter x 2 in. long (12.7 mm x 50.8 mm).
interchim 20ml crimp vials 20mm clear glass 23x75,5mm rounded bottom - bevelled top-label+filling lines P/N : BF1770 Pack : 10 x 100 U. P/N : BF1770 Item : BF1770 Pack : 10 x 100 U.
1.5ml Crimp Neck Vial, 32 x 11.6mm, clear glass, 1st hydrolytic class, wide open-ing, label and filling lines 1.5ml Crimp Neck Vial, 32 x 11.6mm, amber glass, 1st hydrolytic class, wide opening, label and filling lines 11mm Combination Seal: Aluminium Cap, clear lacquered, centre hole; Natural Rubber red-orange/ TEF transparent, 60° shore A,
interchim 1.5ml crimp or snap vials 11mm clear glass 12x32mm no label - high recovery P/N : BG2400 Pack : 1 x 100 U. P/N : BG2400 Item : BG2400 Pack : 1 x 100 U.
KIT 1.5ml Screw Neck Vial, 10-425 thread, 32 x 11.6mm, clear glass, 1st hydrolytic class, wide opening, label and filling lines AND UltraClean Closure: 10mm PP Screw Cap, black, centre hole, 10-425 thread; Silicone white/PTFE red, 45° shore A, 1.3mm
4.0 ml glass, clear with label and filling lines; 13 mm screw thread; 45.0 x 14.7 mm 961-10020-04 black PP-cap 8.5 mm centre hole; silicone cream/PTFE red; 1.5 mm thick; 55° shore A
Free sample hplc vial inserts with mandrel interior and polymer feet for sale Aijiren. Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass
Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.
Wide opening enables easy filling with viscous materials; Broad range of Micro-Inserts. Any combination of 1.5ml Screw Neck Vial 10-425 with one of our 10mm PP Screw Seals can be obtained as a 2in1KIT. Packed in a cleanroom class 10,000 which is a new hygienic standard for chromatography vials.
Cap Type Screw Top Cap Size 10mm Vial Size ND10 Cap Thread Size 10-425 Color Amber Material USP Type 1 Borosilicate Glass Working Volume (mL) 1.5mL Working Volume Screw Top 15mm Amber Glass 12mL Sample Vials - Pack of 300 TSH-CV1968
HPLC. This vial delivers maximum sample capacity (~1 mL) with minimum residual volume (~9 μL). Waters Maximum Recovery Vial Specifically designed for the bottom draw-port needle of the Waters ACQUITY UPLC and Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with minimum residual volume. The 9 mm cap
Ideal for peptide and basic compounds analysis. Inert Polypropylene vials to prevent sample adsorbtion. TORAST-H Bio vials have a special coating which inhibits the adsorption of peptide and basic compounds to the vial. Design for convenient use and 32 x 11.6 mm standard dimension for compatibility on all instrument auto-samplers.
ND11 1,5ml Crimp Neck Vial, 32x1,6mm, clear, label/filling lines, wide opening, 10 x 100 pc $124.62 sku: AAV22201587
