Aijiren Volume Glass Vials With Septum

VOA Vials - Open Top Closures and Septum, Precleaned. Available in clear or amber borosilicate glass Choice of 0.125” or 0.100” PTFE/Silicone Septa Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol CLASS 1: (Standard) Containers are assembled with liner and closure without.

Aijiren vials are available in clear or amber glass, as well as polypropylene. • For most applications, clear glass is the best choice. • If your sample is light sensitive, choose amber glass. • For samples that may stick to glass or chemically react with glass, use polypropylene or deactivated vials. Selecting the Best Material For Your Sample

to optimal analysis. Each septum complements the overall system and enhances chemical performance. Aijiren vial cap septa are specifically formulated and constructed for opti-mum system performance, with minimal coring and superior chemical inertness. Red Rubber/PTFE • Routine analysis • Moderate resealing • Excellent chemical inertness

Aijiren Technologies. needles. Advanced green Septa are long-life, high temperature devices. Aijiren offers users a high-performance alternative to other “green” septa. Features include reduced injection port sticking resulting in more injections per septum. Red Septa are individually packaged for. Related Products: Septum Penetration

Headspace Glass Vials & Headspace Caps. Aijiren headspace vials come in two basic sizes (10 mL glass vials and 20 mL glass vials; Crimp caps are most common however many customers use screw sample and application dependent; clear glass vials and amber vials are available; 11 mm caps, 18 mm caps, and 20 mm caps are engineered to prevent sample contamination while providing consistent, secure seals.

Clear Glass 12 x 32mm Snap Neck Qsert Vial, with Cap and PTFE Septum, 300 µL Volume, 100/pkg Part Number: 186001127 Buy Now Clear Glass 12 x 32mm Screw Neck Max Recovery Vial, 2 mL Volume, 100/pkg

Automatic sampler vial cap septum problems Contamination can occur from vial cap septa, particularly if more than three injections are made from one vial. Repeated punctures may dislodge septum pieces into the sample. To determine if this is a contamination source, cut a 1- x 2-mm segment from a septum and slurry in a vial with 1 ml of the same

Aijiren's polypropylene vials are manufactured from virgin polypropylene; Meets requirements of 21 CFR 177.1520; Some wide opening plastic vials have a glass flanged insert molded to the inside so ample only comes in contact with high-quality glass vial insert and cap septum as an alternative to polypropylene only

rim that presses into the septum for a more effective seal. Vial capacities are 6 and 20 mL and dimensions are 22 x 38 mm and 23 x 75 mm, respectively. Compatibility Flat bottom vials feature a longer neck for fit with Carlo Erba 2; and Aijiren 2; units Round bottom vials

Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps come with your choice of cap septa constructed from either PTFE/silicone or natural red rubber.

5. Vials – to avoid cavitation, don’t fill your vials to the top and ensure that you choose the appropriate glass and septum materials. - You may need to adjust the injector draw speed, depending on sample viscosity - It’s also important to remember that volatile solvents/analytes might evaporate once the septum is pierced

Thomas Screw Cap Septum Vials. top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10 series Septa.

Aijiren vials and caps provide simple ways to boost laboratory productivity and return on investment. Aijiren premium certified vials, caps, high recovery vials, and vial inserts offer industry-leading performance; from the lowest bleed septum materials in our caps to the most inert glass vial materials, we are continuously refining our offerings by addressing small details delivering productivity gains.

• The COE of Aijiren vials is 32–33±1.5 for clear glass, and 48–56±1.5 for amber glass • All vials meet ASTM E438 ‘laboratory class glass’ standards • All vials use Type 1 borosilicate glass. Choosing the right septa for your work. In the same way that chemical composition underpins the choice of a vial, chemistry is an

Shaoxing Aijiren Technologies Co.,Ltd is one of the leading China autosampler vial racks manufacturers and suppliers, welcome to wholesale cheap 2ml vial, 20ml vials, 12x32 vial, glass vials, hplc vial, sterile vials, 9mm ptfe septum, 10ml glass vial, 1.5ml wide opening vial, ptfe silicone septa, chromatography vial, vial filling machine